Home > EI Lamination Stacking Machine >

Automatic EI-150 Lamination Stacking Machine for Large Power and Distribution Transformer Core Assembly, ±0.1 mm Accuracy, 250 Stacks/Min, PLC Control

Product Categories

Plastic Hopper Dryer [11]
Plastic Injection Molding Equipment [1]
Vacuum Loaders [11]
Mold Temperature Control Unit [9]
EI Lamination Stacking Machine [54]
Industrial Chiller [37]
Gravimetric Blenders [8]
Wire Processing Equipment [25]
Acoustic Emission System [10]
Plastic Granulators [14]
Injection Mold Cleaning System [77]
NDT Testing Equipment [6]
Acoustic Emission Detector [23]
Ultrasonic Machining [1]
Acoustic Emission Sensor [27]
Acoustic Emission Preamplifier [9]
Handheld Acoustic Emission Calibrator [15]
Valve Leak Detector [22]
Acoustic Emission Monitoring System [5]
Ultrasonic Flaw Detector [21]
Ultrasonic Thickness Gauge [5]

Shanghai Liangui Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Buy cheap Automatic EI-150 Lamination Stacking Machine for Large Power and Distribution Transformer Core Assembly, ±0.1 mm Accuracy, 250 Stacks/Min, PLC Control from wholesalers

Automatic EI-150 Lamination Stacking Machine for Large Power and Distribution Transformer Core Assembly, ±0.1 mm Accuracy, 250 Stacks/Min, PLC Control

Ask Lasest Price
Model Number :	EI-150
Payment Terms :	T/T
Brand Name :	liangui
Price :	3000 USD

Add to Cart

Product Details
Company Profile

Automatic EI-150 Lamination Stacking Machine for Large Power and Distribution Transformer Core Assembly, ±0.1 mm Accuracy, 250 Stacks/Min, PLC Control

Automatic EI-150 Lamination Stacking Machine for Transformer Core Assembly

The EI-150 automatic lamination stacking machine inserts E & I silicon steel laminations into transformer coil bobbins under PLC control. Built for 2000-5000 VA cores, it holds ±0.1 mm stacking accuracy at speeds up to 250 stacks per minute, producing the large, tightly compressed cores that power and distribution transformers depend on for their declared efficiency.

Why Stacking Quality Decides Your Efficiency Class

In a large transformer, no-load loss runs every hour of the unit's service life - often 15 to 20 years. That makes the core the most consequential part of the design: a stack with uneven compression or misaligned laminations raises no-load loss, and the finished unit can miss the efficiency class it was designed to meet. Because the penalty is paid continuously rather than once, small stacking defects compound into a large lifetime energy cost, and into a compliance risk when the transformer is tested against its declared values. The EI-150 controls what manual stacking cannot: identical placement of every lamination, identical compression force on every stack, and a counted, verifiable lamination quantity.

Key Specifications

Parameter	Details
Model	EI-150
Stacking Accuracy	±0.1 mm
Positioning Accuracy	±0.02 mm
Stacking Speed	Up to 250 stacks per minute
Applicable Core Range	2000-5000 VA EI cores
Bobbin Window Width	Approx. 50 mm
Power Supply	AC 200~250V, 50/60 Hz (customizable)
Power Consumption	30~60 W
Operating Environment	0°C to 45°C
Service Air Pressure	0.4-0.65 MPa (dry & clean air)
Silicon Steel Thickness	Compatible with 0.3 mm, 0.35 mm, 0.5 mm
Applicable Bobbin Type	Cardboard or plastic bobbin
Control System	PLC with touch screen interface
Short Circuit Protection	AC220V overload protection + DC24V output short-circuit protection
Grounding	Dual grounding: 220V + 24V
Machine Weight	70 kg
Warranty	12 months

Precision That Shows Up on the Test Report

✅ Stable Effective Air Gap – ±0.1 mm stacking accuracy holds the air gap steady, so no-load current and core loss stay inside the designed range.

✅ ±0.02 mm Positioning – Tight E & I alignment limits burrs and edge misalignment that locally saturate the core and raise loss.

✅ Uniform Stack Compression – Consistent stacking force avoids the loose stacks that are a common hidden cause of high no-load loss.

✅ Controlled Lamination Count – The PLC counts every sheet, so each core carries exactly the lamination quantity its design specifies.

✅ Smooth Lamination Handling – Preserves the insulation coating on 0.3 mm, 0.35 mm and 0.5 mm silicon steel, limiting eddy-current loss.

✅ Large-Core Capability – Handles 2000-5000 VA cores with the same repeatability it delivers on small formats.

✅ Automatic Jam Detection – The PLC stops the cycle on a misfeed before material or tooling is damaged.

✅ Durable and Safe – High-strength steel frame, dual grounding, overload and short-circuit protection, emergency stop and safety guards.

Applications

Sized for 2000-5000 VA cores, the EI-150 suits manufacturers of power and distribution transformers, industrial control and isolation transformers, inverter and UPS transformers, welding and rectifier transformers, and heavy-duty power supplies. Both cardboard and plastic bobbins are supported, and the machine works as a standalone station or inside a larger winding and assembly line.

Why Choose Us?

We are a direct manufacturer offering competitive factory pricing and CE certified quality assurance. Our equipment has served globally renowned customers including GE Vernova and Eaton (USA) as well as leading enterprises such as CATL and Chint Electric, and is exported to more than 20 countries and regions. Delivery within 1-15 working days, professional after-sales technical support, and a 12-month warranty. The full EI series from EI-19 to EI-300 is available to match your production requirements.

Quality Automatic EI-150 Lamination Stacking Machine for Large Power and Distribution Transformer Core Assembly, ±0.1 mm Accuracy, 250 Stacks/Min, PLC Control for sale

Automatic EI-150 Lamination Stacking Machine for Large Power and Distribution Transformer Core Assembly, ±0.1 mm Accuracy, 250 Stacks/Min, PLC Control

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shanghai Liangui Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Find Similar Products By Category:

Measurement & Analysis Instruments